Dielectric Laboratories, Inc. Cazenovia, NY today announced that it has received a 2012 Boeing Performance Excellence Award. The Boeing Company issues the award annually to recognize suppliers who have achieved superior performance. Dielectric Laboratories, Inc. maintained a Silver composite performance rating for each month of the 12-month performance.  Dielectric Laboratories is known for ceramic expertise, manufacturing know-how, product quality, customer service, product customization, and clever Microwave and RF design engineering that sets us apart. Over three decades of material science formulation and development, more than one hundred proprietary and/or patented ceramic formulations, and multiple recent patent filings, DLI is the pre-eminent ceramic component manufacturer. You can turn to DLI with confidence for your high frequency Single-Layer Capacitors, Multi-Layer Capacitors, Heat Sinks, Resonators, Filters, and Build-To-Print or Custom Thin Film Components.

The VS–501 VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G coherent optical receivers. The VS–501 provides 12fs rms jitter in a 12kHz to 20MHz integration bandwidth and is available from 1.3GHz to 1.8GHz.

The PX–724 is a quad frequency crystal oscillator, based upon Vectron's high performance phase locked loop (HPLL) frequency multplier ASIC that combines key digital synthesis techniques with VI's proven core analog technology blocks. A standard low frequency crystal provides the reference to the fractonal–n synthesizer so that virtually any frequency between 10MHz and 1200MHz can be factory programmed allowing quick turn manufacturing.

The OX–205 is an ultra low phase noise ovenized crystal oscillator with a noise floor of –176 dBc/Hz in a compact 1" x 1" enclosure. Designed for applications that demand extremely low noise sources like instrumentation, test & measurement, radar and communication applications. Custom frequencies available upon request.

RJ45 connections are all-round connections for more than 30 years. They are found in the telephone and data network connections of buildings and the home network. The connection to the RJ45 jack of a device is done in all these applications by a RJ45 plug with connection line.

However, applications exist where it is necessary to interconnect two or more parts of the device by RJ45.

From 23/07/2012 on, Kaschke is going to use the new logistics centrum in the Florenz-Sartorius-Straße in Göttingen.

PC board connectivity has to meet new requirements as many functions and applications are integrated or migrated in one device and devices are getting minimized in size; this development is provoking a high density of pc boards and their arrangement. As a competent partner and specialist for connection components and cabling systems METZ CONNECT has successfully met this challenge.

We are pleased to announce today that Standex Electronics and MEDER electronic are now officially operating as one company. This combination unites two market leaders, Standex in the design and manufacture of custom magnetics and reed switches, and MEDER in a wide range of reed switches, reed relays and sensors.

The demand for high voltage components, particularly for high reliability applications, is increasing. In many industries, high voltage power supplies are essential, especially in the medical, telecoms, communications, military and aerospace sectors. To meet this expanding demand, Syfer Technology has extended its range of high voltage radial capacitors.

The planning tool from the Canadian company iBwave has successfully established itself almost all over the world as the standard for planning in-building projects. Using this the network coverage in buildings can be calculated in a whole variety of ways and the capacities can be planned in advance. For realistic simulation the iBwave product database provides direct access to products by all reputable manufacturers.

HTR an ISO/TS 16949 : 2009 Certified manufacturer has received UL Certification as per UL 1412 (HTR file #E342534) for their range of safety fusible Wire Wound Resistors. These devices are manufactured using specially selected wires which are wound on thermally efficient ceramic body & welded to end caps thus creating a fully welded product for 100% reliability.

The OX–204 is an Ultra Low Noise OCXO designed for applications that have a need for uncompromised phase noise performance in a 1" x 1" package. The OX–204 achieves a noise floor of <-175dBc/Hz, without compromising the close–in phase noise at 1 and 10 Hz. The OX–204 is the latest addition to Vectron's family of low phase noise products.

The Starter Kit provides a simple, self-contained way to experience solid-state real-time in-line ViSmart™ viscosity sensor capabilities first-hand.

Novacap offers a line of high temperature, high dielectric constant stable capacitors using a dielectric formulation designed for reliable operation at temperatures up to 200 C.

Novacap offers a line of high-capacitance multilayer ceramic capacitors that combine higher volumetric capacitance per given board area with lower equivalent series resistance (ESR) than alternative solutions.

Around 100 years after their invention, electric vehicles are experiencing a renaissance. If you believe the message of the IAA in Frankfurt, most cars will soon rely on electricity and it is considered a challenge to ensure the safe and efficient charging cycle of electric vehicles.

FEINMETALL now offers a wide range of spring contact probes for radio frequency applications. Especially antenna connectors can be contacted with new coaxially built contact probes.

Ideal user-friendliness and non-stop availability –  the website www.metz-connect.com offers you the most recent news about METZ CONNECT and the products that you need for your daily business. And all this at a speed that will really impress you.

Even after more than half a century company's history and since long time operating in internationall business, Kaschke GmbH stay loyal to the city of Göttingen in Germany.

For current detecting in small applications, KOA has now expanded it's existing TLR-series by adding the new size 0402.

The size 0402 is offered with a high power rating of 0.2W - rated @+105°C - and the resistance value of 10 milliohm as standard product.

In many applications, the lifetime of electronic devices is directly linked to the lifetime of the elcaps inside. About this theme, which is very complex, Dr. Arne Albertsen of Jianghai Europe has written a very interesting article. For those of you who are really interested, please download the attachment.

Engineers have been using de-rated DC multilayer chip capacitors (MLCCs) for years to meet the need for capacitance in AC circuits higher than the 4.7nF norm.

The concept module M-LEDlight illumination optics is based on a TIR collimator (Total Internal Reflection) as a base body and exchangeable facet designs for various beam properties. The company develops, simulates, tests and produces in house - the result is custom-made light engines for complex lighting solutions with targeted illumination.

Feinmetall's new catalogue "Testadapters" is hot from the press. This catalogue contains an extended portfolio of mechanical and vacuum test adapter types as well as technical information and helpful application notes.

The OX-501, the mini OCXO from Vectron combines a small footprint with high stability, providing 20ppb over the full industrial temperature range in a compact industry standard 9x14mm package.

Nine top teams are using the IVT-F current sensor made by Isabellenhütte, Germany, during the 2012 Formula 1 season, which started on March 18th in Melbourne, Australia. The module has been integrated in the so-called E-KER systems.

The latest innovation in multilayer chip capacitors (MLCCs) from Syfer Technology is a range of compact devices suitable for high voltage applications, supplied with a built-in protective coating. Typically, with standard high voltage capacitors, a special coating is applied after the devices are soldered onto the board in order to minimise the risk of flashover from one termination on the chip to the other.

Reed Technology from MEDER electronic helps to make today's lifestyle products small, practical, functional and stylish. Our miniature switches, relays and sensors allow electronic devices to continue to push the latest trends and new eye-catching developments in products such as smart phones, desktop computers and sound systems, etc.

Surge protection is becoming essential for all circuit designs. With the SG73-series, KOA offers a resistor series which has approx. 10 times pulse handling capability compared to standard flat chip resistors. Due to this outstanding pulse load capability they are suitable for protection of electronic cuircuits against extreme pulses and surges.These parts are available with ±10% or ±20% tolerance.

The MX-170 oven controlled oscillator from Vectron provides excellent temperature stability and low aging rates in a small package through enhanced thermal isolation and microprocessor correction techniques.

The new OX-503 is the smallest SC cut based oscillator on the market today. Applications that put a premium on the oscillator's short term stability and aging are not served by compensated AT cut OCXOs.

The VS–501 VCSO (Voltage Controlled Saw Oscillator) is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G coherent optical receivers. The VS–501 provides 12fs rms jitter in a 12kHz to 20MHz integration bandwidth and is available from 1.3GHz to 1.8GHz

Feinmetall's new catalogue "Spring Contact Probes" contains an extended portfolio of contact probes as well as technical information and helpful application notes.

Demand for Syfer Technology capacitors is continually growing, but selecting the most appropriate MLCC for high frequency circuit applications can be a difficult task for any Engineer. Syfer has now made that easier with a range of sample kits for its range of High Q chip capacitors.

MLCCs are particularly suitable for high voltage applications where small size is required. For standard high voltage capacitors a coating may be required to be applied postsoldering, to minimise the risk of flashover from one termination on the chip to the other.

IPDiA, a leading supplier of Silicon passive components, today introduced a new generation of RF companion chip products, expanding its product portfolio in high-density Integrated Passive Devices. ASPICS320.604, 605& 606 Integrated Passive Devices (RF ISM range 868MHz & 915MHz) are specifically designed for use with the SX1211 transceiver from Semtech, a leading supplier of analog and mixed-signal semiconductors. For more information contact the Heynen Sales team, or ...

DLI-designed tuning rods to utilize their C06, C11 or C17 capacitors of a specified value attached to our High-Q insulating holder to find the optimum capacitor for a particular circuit or application without soldering capacitors.

One general trend in electronics is the integration of components and functions in one single integrated circuit. IPDiA, shows that not only active components can be part of an IC, but also several passive components can be integrated.

DLI offers their cusomers an unique method of obtaining the right data to make the proper capacitor and/or filter design decisions. This is done by so called "design guides" using selection software or a form to collect all the information for a proper advise.

Go to DLI Design Guide homepage

Engineering teams like to put our parts through their paces. When design engineers told us they'd like a termination that would allow them the freedom to use harsh solder profiles and multiple reworks, we listened!

DLI is now offering our proprietary NA dielectric formulation in a variety of MLC case sizes. With its negative temperature coefficient of capacitance (N30+/-15ppm/ °C), this high-Q porcelain dielectric is ideal for temperature compensating situations. NA is offered as a drop-in replacement for most AH/CF part numbers.

Leading UK passive component manufacturer, Syfer, has announced the availability of a number of important extensions to its already wide range of solder-in panel mount EMI filters.

M12 connectors have become– besides the variants with A and B coding – even for the Ethernet in their D-coded variants an indispensable part for the everyday use in industry. They are well accepted particularly in harsh industrial environments due to their special features such as solidity, high protection class IP67 and vibration resistance.

Hi-Tech Resistors Pvt. Ltd. was incorporated in 1986 as a specialist producer of standard fixed wire wound resistors with basic technology acquired through Samsung Co. Ltd. HTR has now transformed itself into a broad based manufacturer of Wire Wound, fusible and low ohm/current sense resistive devices, with state-of-the-art design and testing capabilities that are comparable with the best in the world.

A very important milestone in Jianghai's company history. Since September 2011 Jianghai is certified according to ISO/TS 16949. You will find the ISO/TS certificate on the Jianghai homepage at "quality".

Vectron launches new range of MEMS Clock Oscillators (VM-702, 802 and 822). 
This new MEMS clock family offers ultra-low jitter and offers excellent power supply noise immunity and PECL, LVDS and HCSL outputs.

Syfer's web based CapCad™ capacitor modelling software has been developed to provide customers with an easy to use and readily accessible comparison tool for choosing the best Multilayer Capacitors to suit the customer's needs.

In your applications, the precision resistors that measure currents need to have a low temperature coefficient (TC) have a low thermal EMF (electro motive force), a very good stability, low inductance and high (peak) power.

Recently Vectron went live with the Core Competency section on the front page of their website. This section highlights Vectron's Low Phase Noise, High Stability, High Shock & Vibration and Low-G Sensitivity products. In each section you will find a table highlighting the best performing products.

See www.vectron.com

Competetive storage choke series KLL as alternative to sendust or MPP components. Please send e-mail to heynen@heynen.com and ask the product catalog.